Skip to main content

📡 GPS Tracking Device Integration

Integrate GPS tracking devices seamlessly with Fleet Stack software. This comprehensive guide simplifies the process for any GPS device worldwide.

📘 Quick Overview​

Integrating GPS tracking devices involves:

  • Understanding GPS tracking components to ensure proper setup.
  • Setting up the GPS tracking server on a cloud platform.
  • Configuring the GPS device for accurate data transmission.
  • Performing final checks and troubleshooting to ensure smooth operation.

🚀 Prerequisites​

Before starting, ensure you have:

  • A cloud server on platforms like AWS, Google Cloud, or Azure.
  • A GPS device with an active SIM card.
  • Basic knowledge of network configurations and GPS device commands.

📂 Step-by-Step Guide​

Step 1: Understand GPS Tracking Components​

Familiarize yourself with the essential components of a GPS tracking system:

  • GPS Device: Receives satellite signals to determine precise locations and transmits data to a server.
  • SIM Card: Provides internet connectivity via GPRS for data transmission.
  • GPS Server: Processes and displays data, allowing real-time vehicle tracking.

Step 1: Points to Consider Before GPS Device Integration​

Ensure a smooth integration process by considering the following key points:

  1. Port Open:

    • Importance: Before starting GPS device integration, ensure that your server port is open.
    • Verification: Use online tools to check the port status. Check Port Status

  2. IP Whitelist:

    • Explanation: Telecom companies may block unfamiliar communication channels. Inform them to whitelist your server's IP address.
    • Process: It's a straightforward procedure to ensure seamless communication.

  3. APN (Access Point Name):

    • Role: APN is crucial for internet connectivity, enabling the GPS device to communicate with the server.
    • Variability: APNs differ among operators, and a single telecom operator may have multiple APNs.

  4. Timezone:

    • Significance: Accurate timing is essential for vehicle tracking.
    • Recommendation: Set the timezone to UTC (0:00) for Fleet Stack. Ensure the correct user location is selected.

  5. Device Power Connection:

    • Requirement: Ensure the GPS device is properly connected to a power source with secure wiring to prevent power issues.

  6. Message Command:

    • Functionality: When sending commands to the GPS device, a response should be received if the command is delivered.
    • Troubleshooting: If no response is received, investigate connectivity and command syntax issues.

  7. GPRS Link Down:

    • Cause: This error typically occurs when the telecom network is inaccessible or if the APN is set up incorrectly.
    • Solution: Ensure that you are using the correct APN. Double-check the APN settings specific to your telecom operator to establish a reliable connection.

By considering these points, you can ensure a successful integration of your GPS device with Fleet Stack software, minimizing potential issues and enhancing operational efficiency.

Note: Here's the configuration guide for the GT06 device. Use commands according to your device and region:

Step 3: Follow these steps to integrate GPS device to Fleet Stack Software :​

  1. Set the APN:

    • Command: Use the APN setting command specific to the GT06 device. For GT06, typically use the format: 
      APN,[APN_Name]#
    • Example: If your provider’s APN is internet, the command might be: 
      APN,internet#
    • Ensure you replace [APN_Name] with the appropriate details provided by your mobile carrier.

  2. Configure Server IP and Port:

    • Command: Use the server setting command for GT06 devices to direct data to your server. 
      SERVER,[IP],[Port]#
    • Example: If your server's IP is 192.168.1.100 and port is 5027, use: 
      SERVER,192.168.1.100,5027#

  3. Set Data Sending Timer:

    • Command: Configure how frequently the GT06 device sends data using: 
      TIMER,[Interval_in_seconds]#
    • Example: To set a 10-second data interval, use: 
      TIMER,10#

  4. Set Timezone:

    • Command: Set the timezone to UTC using the timezone setting command for GT06: 
      TIMEZONE,0#
    • This command sets the device to UTC (0:00) for accurate data timestamps.

  5. Reboot the Device (Optional):

    • Command: Use the reboot command for GT06 to apply all configuration changes: 
      RESET#
    • This ensures that all settings are active and the device is ready to transmit data.

  6. Check Device Status:

    • Command: Use the status command to verify the current configuration and operational status of the GT06 device: 
      STATUS#

  7. Add Parameter Command:

    • Command: Use the parameter command to set additional parameters for the GT06 device:: 
      PARAM,[Parameter_Name],[Value]#
    • To set a specific parameter, replace [Parameter_Name] and [Value] with the desired settings.

By following these GT06-specific instructions, including the status check, you can ensure your GPS tracking device is properly configured and operational for use with the Fleet Stack software.

Important Notes for GPS Device Configuration​

Ensure optimal device performance by considering the following notes:

  1. SIM Card Functionality:

    • Requirement: Verify that the device’s SIM card is capable of sending and receiving SMS messages. This is crucial for command communication and troubleshooting.

  2. Authentication and Parameters:

    • Consideration: Check if any authentication or additional parameters are required based on your device model and firmware version. This ensures compatibility and proper functionality.

  3. Model-Specific Guidance:

    • Resources: For precise commands and settings specific to your Device GPS model, refer to the user manual of device.

Step 4: Final Checks and Troubleshooting​

Ensure everything is set up correctly and troubleshoot common issues.

Tasks to Complete:​

  1. Ensure Port and IP Whitelisting:

    • Verify server port accessibility and contact your telecom provider to whitelist your server's IP.

  2. Verify Device Power Connection:

    • Check that the GPS device is properly powered and all connections are stable.

  3. Troubleshoot Common Issues:

    • Check APN settings if the GPRS link is down.
    • Regularly update device firmware for compatibility.

Note: If you are still facing any problems in integrating GPS software with devices, please post on the Fleet Stack Forum.

📞 Conclusion​

By following this guide, you can effectively integrate GPS tracking devices with Fleet Stack software, enhancing your fleet management capabilities. For further assistance, visit Fleet Stack's support forum or contact their team for personalized help.